Specials

Tradespro Locking Plier Set 3pc

Tradespro Locking Plier Set 3pc

Price: NZ$26.58 NZ$16.00

Norton Folding Earmuffs SE4080

Adjustable and foldable, Meets US and European standards, Grade 4 earmuff suitable for everyday noise protection.

Price: NZ$40.04 NZ$15.00

Norton Kevlar Welding Gloves SE2370

Kevlar stitched seams for resistance to spark burn and to prevent premature failure. AS363030

Price: NZ$24.20 NZ$14.00

Bahco 10pc Screwdriver Set

Top quality by Bahco. The Bahco Pro-Cut range features excellent build quality with the Professional in mind and offers ease of use, safety and top quality fit and finish. Blades hardened & tempered. #1, 2 & 3 Phillips. #1 & 2 Square Drive. 3 Slotted & 1 Stumpy.

Price: NZ$55.09 NZ$38.00

TradeQuip Large Long Nose Pliers

280mm Long handled set with 2 x Straight and 2 x bent stored in a wallet, Handy tool for the workshop.

Price: NZ$55.20 NZ$28.00

TopTul 3pc Long Screwdriver Set

Screwdriver Set Extra Long 3piece, Slotted 5.5 x 400mm, 6.5 x 400mm, Phillips 1 x 400mm, Cushion super grip handles

Price: NZ$42.02 NZ$29.99

Torin 20 Ton Bottle Jack

20 Ton Low Profile Bottle Jack with a minimum height of 168mm and maximum of 245mm, with carry handle.

Price: NZ$135.70 NZ$89.00

King Tony 1/2Dr Deep Metric Socket Set

KING TONY 1/2dr 15pc D/HEX METRIC DEEP SOCKET SET

Price: NZ$145.99 NZ$143.75

King Tony Metric Flare Wrench Set

KING TONY 6pc METRIC FLARE NUT WRENCH SET 8-22mm

Price: NZ$149.50 NZ$86.25

European Style Line Diagonal Cutting Nipper 163mm

Price: NZ$30.25 NZ$18.40

King Tony Diag Cut Nippers 183mm

King Tony Diag Cut Nippers Heavy Duty 183mm

Price: NZ$35.77 NZ$18.34

King Tony Long Nose Pliers 175mm

PLIER LONG NOSE 175mm/7" KT6311-06 KING TONY

Price: NZ$32.19 NZ$18.40

King Tony Groove Joint Pliers 250mm

PLIER GROOVE JOINT 250mm/10" KT6511-10C KING TONY

Price: NZ$49.34 NZ$31.10

King Tony Groove Joint Pliers 325mm

PLIER GROOVE JOINT 300mm/12" KT6511-13C KING TONY

Price: NZ$58.65 NZ$34.99

King Tony Groove Joint Pliers 400mm

PLIER GROOVE JOINT 400mm/16" KT6511-17C KING TONY

Price: NZ$91.43 NZ$53.50

P&N Burr Set 5 peice Tungsten Carbide

Contents Cylindrical (Square) Cylindrical (Radius) Tree (Radius) Tree (Pointed) Flame All 6mm Shank 12mm Diameter and 25mm long. Tungsten Carbide

Price: NZ$188.00 NZ$149.99

Hindin Maquip 16RSE 16cfm Compressor

3 Cylinder Single Phase 3hp Belt Driven, 15amp Plug, 281 litres per minute Free Air Delivery. Equipped with continuous run capacity to save stop start the electric motor.Made in Italy. Assembled in New Zealand. One of the best available Compressors on the market.

Price: NZ$1838.99 NZ$1920.01

Garryson 10pc Tungsten Carbide Burr Set

This is a 10 piece quality burr set with a 6mm shaft, The ten most commonly used burrs, In a strong metal case.

Price: NZ$356.76 NZ$249.00

P&N Burr Set 5 peice Tungsten Carbide

Contents Cylindrical (Square) Cylindrical (Radius) Tree (Radius) Tree (Pointed) Flame All 6mm Shank 12mm Diameter and 25mm long. Tungsten Carbide

Price: NZ$188.00 NZ$149.99

WeldMaster Gas Welding/Cutting Kit

Tooline Gas Welding/Cutting Kit Welds to 10mm (size 20 tip) and cuts to 150mm

Price: NZ$407.87 NZ$349.99

XcelGas Industrial Oxygen Acetylene Gas Cutting & Welding Set WE4978

Oxygen & Acetylene Gas Set Kit Contents: 1 x Heavy Duty Tool Box 1 x Oxygen Regulator 1 x Acetylene Regulator 1 x Blow Pipe Handle 1 x Cutting Attachment 1 x Mixer 3 x Welding Tips No's 8/12/15 3 x Cutting Nozzles No's 8/12/15 1 x Oxygen Regulator Flash Back Arrestor 1 x Fuel Gas Regulator Flash Back Arrestor 1 x Welding / Cutting Goggles 1 x Tip Cleaner Set 1 x Combination Spanner 1 x Radius Bar and Pivot 1 x Roller Guide Manufactured and Compliant to AS/NZ 4267 Standard XG-GSK-A1

Price: NZ$679.01 NZ$499.00

Bosch 125mm Grinder Kit

This 125mm/5" kit consists of a 850 watt angle grinder, with gloves, safety glasses and 4 discs all in a robust case.

Price: NZ$158.00 NZ$115.00

Hitachi 125mm Angle Grinder G13SB3 PT4079

Power and performance in a compact package Heat resistant, super high powered 1300W motor Sleek, low profile head Strong alloy gearbox Spindle lock and ergonomically angled side handle G13SB3

Price: NZ$274.28 NZ$199.00

Bosch GWS15-125CIT PT21610

1500W Weight: 2.4kg

Price: NZ$448.75 NZ$350.99

Bosch GSR 18 VE-2 LI 3.0Ah Destroyer Drill Driver Kit PT1007

Slim and ergonomic design grip for fatigue less job Bosch "EMP" (= Electronic Motor protection) to protect a motor from burn-out Bosch "ECP" (= Electronic Cell Protection) to protect a battery pack from damages LED light to illuminate dark area Technical data: Torque, max. (hard screwdriving applications) 80 Nm Torque, max. (soft screwdriving applications) 43 Nm No-load speed (1st gear/2nd gear) 0 - 380 / 1600 rpm Chuck clamping range 1,5 - 13 mm Battery voltage 18 V Weight incl. battery 2,1 kg Torque settings 25+1 Drilling diameter: Max. drilling diameter in wood 50 mm Max. drilling diameter in steel 13 mm Screw diameter: Max. screw diameter 12 mm Kit Includes: 1 x Drill 2 x 3.0Ah batteries 1 x 30 min charger 1 x L-Boxx Storage F005XR0143 Also available as a bare tool: PT1155

Price: NZ$775.00 NZ$598.99

Hitachi 125mm Angle Grinder G13SB3 PT4079

Power and performance in a compact package Heat resistant, super high powered 1300W motor Sleek, low profile head Strong alloy gearbox Spindle lock and ergonomically angled side handle G13SB3

Price: NZ$274.28 NZ$199.00

Hitachi 18mm Impact Drill

2 spd - variable-reversible, 13mm chuck. 690 watt motor supplied in carry case.

Price: NZ$306.67 NZ$215.00

Bosch MultiTool GOP250CE

A universe full of possibilities – The blue problem solver ■Powerful 250-watt motor with Constant Electronic for constant work progress in every application ■Slim grip circumference for more comfortable working in precision applications and continuous use ■Easy, precise positioning on the workpiece due to oscillating motion. This enables accurate cutting and prevents damage to high-quality work materials ■Speed preselection for perfect adjustment to suit different accessories and work materials ■Extensive range of accessories offers solutions for many applications ■Rubber-coated handle surfaces enable comfortable work in different positions ■Integrated ball grommet increases flexibility and prevents cable breaks

Price: NZ$284.05 NZ$237.99

Evolution 35mm Magnetic Base Drill PT7208

*****FREE CUTTER SET ONLY WHILE STOCKS LAST***** 1200 watt motor Max cutting diameter 35mm Max cutting depth 50mm Weight 12.7kg Comes with: Coolant tank Coolant pipe Guard Carry Case HT1ME3500

Price: NZ$1495.00 NZ$1450.00

Starrett Dial Indicator

3025-481 Dial Indicator · Tolerance hands and bezel lock. · Long life jewel bearings. · Lug-on-center back. · Dial Indicator (Range 10mm)(Graduation 0.01mm)(Dial Reading 0-100 )

Price: NZ$92.00 NZ$73.99

BOSCH Laser rangefinder 70m Bosch DLE70

BOSCH Laser rangefinder 70m Bosch DLE70 Modern laser technology for precise measurement up to 70 metres Measure up to ten times faster using wall area, minimum and maximum functions Tools fits into any shirt pocket Comes complete with: 4 x1.5V (AAA) batteries, carrying strap, protective pouch Measuring range: 0.05-70m Measure Accuracy +/- 1.5mm Batterylifetime, approx. -Individual measurements 30,000 -Continuous measurement 5h Dust and splash protection: IP54 Dimensions (L/W/H): 100 x 59 x32 mm Weight: 0.18kg

Price: NZ$428.00 NZ$355.99

Starrett Magnetic Angle Meter

AM-2 Angle Meter, 5"X5" Magnetic Base And BackItem # 921208 •Magnetic base frees hands when used on ferrous surfaces •Measures any angle for pitch or slope

Price: NZ$78.89 NZ$19.00

Starrett 12"/300mm Vernier Caliper

Starrett 125MEA-12/300 Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005" Accuracy, 0.001"/0.02mm Graduation, In Plastic Case

Price: NZ$391.00 NZ$256.00

Starrett Dial Indicator

3025-481 Dial Indicator · Tolerance hands and bezel lock. · Long life jewel bearings. · Lug-on-center back. · Dial Indicator (Range 10mm)(Graduation 0.01mm)(Dial Reading 0-100 )

Price: NZ$92.00 NZ$73.99

Starrett Mag Base 3657AA

Starrett 3657aa Magnetic Base Indicator Holder Accommodates all Starrett test, back-plunger, AGD, dial and miniature-dial indicators as well as similar indicators of other manufacturers. Features: ■Designed for use with dial indicators ■Incorporating an on/off switch which controls the powerful magnetic base ■Can be adjusted to any position and locked ■Magnetic base, upright base post, snug, rod, indicator attachment and snug complete - 6.4 mm (1/4 Inch) and 9.5 mm (3/8 Inch) holes ■Fine adjustment

Price: NZ$89.00 NZ$73.99

Vertex 600mm/24" Ruler with FREE 6" & 12" Rulers ME5082

Rule 600mm/24" with FREE 6" & 12" Rules

Price: NZ$36.92 NZ$29.70

Limit Combination Square Set

With protractor Angle head and centre head sliding on the rule Spirit level on angle head and protractor In a plastic box 119180107

Price: NZ$124.99 NZ$99.00

Komelon TA3350 8m x 26&39; Tape Pocket Tape

Komelon TA3350 8m x 26&39; Tape Pocket Tape ME5391

Price: NZ$39.63 NZ$28.00

Komelon TA3345 Tape Measure 5m/16ft

Komelon TA3345 Tape Measure 5m/16ft ME5389

Price: NZ$21.85 NZ$17.50

Komelon TA3335 Tape Measure 10m

Komelon TA3335 Tape Measure 10m ME5398

Price: NZ$35.72 NZ$32.00

Komelon 8 Metre Professional Steel Tape Measure ME5390

Nylon coated blade for added maximum protection Ergonomically designed case for comfortable grip Top control speed lock holds blade securely Thick high carbon steel blade for maximum blade extension Blade width - 25mm TA3330

Price: NZ$34.02 NZ$28.00

Komelon 8m Tape measure Auto Lock ME5392

Komelon Tape measure Auto Lock 8mt 8m x 25m steel tape Features bottom lock TA3785

Price: NZ$19.42 NZ$9.99

Tengtools 1292AG-EK Torque Wrench 1/4" Drive

Tengtools 1292AG-EK Torque Wrench 1/4" Drive ME4695

Price: NZ$111.41 NZ$79.01

Tengtools 3892AK-E3K Torque Wrench 3/8" Drive

Tengtools 3892AK-E3K Torque Wrench 3/8" Drive ME4696

Price: NZ$121.65 NZ$99.00

Tengtools 1292AG-EPK Torque Wrench 1/2" Drive

Tengtools 1292AG-EPK Torque Wrench 1/2" Drive ME46960

Price: NZ$159.28 NZ$105.00

Toptul 1/4dr 6-30Nm Torque Wrench ME0010

6 - 30Nm Steel Ratchet Head Reverse ratchet action function Push to lock/pull to unlock feature Easy to Use 350mm long ANAF0803

Price: NZ$121.65 NZ$95.00

TopTul 3/8 Dr 19-110Nm Torque Wrench ME0011

19 - 110Nm Steel Ratchet Head Reverse Ratchet Action Function Push to lock/pull to unlock system Easy to use 385mm long ANAF1211

Price: NZ$131.87 NZ$100.00

TopTul 1/2Dr 40-210Nm Torque Wrench ME0012

40Nm - 210Nm Easy to use Steel Ratchet Head Reverse ratchet action function Push to lock/pull to unlock scale setting feature 535mm long ANAF1621

Price: NZ$142.09 NZ$105.00

Limit 150mm Digital Caliper ME3795

Limit 150mm Digital Caliper Hardened stainless steel Zero set in any position with Auto Off 0.01mm/0.0005" 144550100

Price: NZ$109.00 NZ$78.99

Starrett 799-8/200 Digital Calipers 200mm/8"

Starrett 799-8/200 Digital Calipers 200mm/8" ME3551

Price: NZ$224.25 NZ$158.00

Starrett 799-6/150 Digital Vernier Calipers

Starrett 799-6/150 Digital Vernier Calipers ME3550

Price: NZ$179.00 NZ$119.99

Prograde 6"/150mm Digital Calipers ME3799

Hardened Stainless Steel Internal and External measuring Metric and Imperial instant crossover Large LCD screen display With depth measure Pro-grade Digital Caliper 82806

Price: NZ$66.44 NZ$31.99

Torin 20 Ton Bottle Jack

20 Ton Low Profile Bottle Jack with a minimum height of 168mm and maximum of 245mm, with carry handle.

Price: NZ$135.70 NZ$89.00

CRC Marker Pens - Black CP3262

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually 20365

Price: NZ$6.10 NZ$4.90

CRC Marker Pen - Red CP3266

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually Red 20388

Price: NZ$6.10 NZ$4.90

CRC Marker Pen - White CP3260

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually White 20395

Price: NZ$6.10 NZ$4.90

CRC Marker Pen - Yellow CP3264

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually Yellow 20400

Price: NZ$6.10 NZ$4.90

Tradezone Drill Set 1-13mm E3M

Tradezone Drill Set 1-13mm E3M (0.5mm increments) (Rebranded Evacut E3M)

Price: NZ$176.82 NZ$126.99

Frost 25pc Metric Drill Set DR5000

• Made from durable poly propelene • Utilising the latest styling • Metric sizes • High speed steel bits • 1.0 - 13mm in 0.5mm rises • For drilling metal,wood and plastic S92260

Price: NZ$50.08 NZ$38.00

Evacut 175330 Dial-a-Drill Kit - DD19m

Evacut 175330 Dial-a-Drill Kit - DD19m DR5242

Price: NZ$100.42 NZ$67.30

Rolson 3 Pce Step Drill Set

Rolson 3 Pce Step Drill Set (4-12mm, 4-20mm, 4-32mm)

Price: NZ$101.20 NZ$69.00

Drill Doctor Drill Sharpener DX750

Drill Doctor Drill Sharpener DX750 Sharpens drills between 3mm & 19mm

Price: NZ$424.22 NZ$599.00

Blumol 9 Pc Holesaw Set

Blumol 9 Pc Holesaw Set - (Bi-metal 16, 20, 25, 32, 40, 51mm sizes)

Price: NZ$172.75 NZ$129.00

Groz GZ 43088 Grease Gun Pistol Grip Vario 450gm

Groz GZ 43088 Grease Gun Pistol Grip Vario 450gm GG4020

Price: NZ$126.39 NZ$89.00

Alemlube Trigger Action Grease Gun

Alemlube Trigger Action Grease Gun

Price: NZ$52.67 NZ$37.90

Powerbuilt Grease Gun 500cc AH1227

10,000PSI Uses standard 450gram cartridges Knurled barrel for Non-Slip grip Lever action Optional loading methods Includes 170mm Steel Extension with Coupler, 250mm Flexible Extension and Coupler Powerbuilt Grease Gun 500cc AH1227

Price: NZ$52.16 NZ$29.99

Powerbuilt Pistol Grip Grease Gun GG8122

5,000PSI Uses standard 450gram cartridges Features optional outlets Knurled barrel for non-slip grip Lightweight, durable die-cast aluminium head Short stroke eases use in tight areas one-way flow valve prevents grease back-up under high pressure Can be bulk loaded, suction filled or hand filled Includes 125mm Steel Extension with Coupler, 250mm Flexible Extension and Coupler AH1228

Price: NZ$60.58 NZ$39.00

LED Lenser P4 Pocket Torch EL2087

The torch can be easily attached to shirt or belt and is so light that you’ll hardly notice it. However, you will notice its brilliant, super-bright light which you can focus by turning the torch head. The P4 is operated with two standard AAA batteries. Specifications: LED: 1 x 5mm Nichia Luminous Flux: 20 lumens Beam Width / Type: focusable from wide flood beam to narrow spot Beam Range: up to 27 metres Burn Times: up to 3.5 hours Batteries: 2 x AAA (included) Diameter of Head: 14.5mm Body: 14.5mm Length: 140mm Weight: 60 grams LED8404

Price: NZ$60.31 NZ$30.00

LED Lenser H5 Headlamp EL2085

The 0.5 watt LED light chip produces a light beam effective over 50 metres, which can be focused from a spot to a flood. The H5 is a great all-round, general-purpose head lamp. Water resistant, it has an easy to use on/off switch, adjustable straps and a beam which has directional adjustability. Comes with a neoprene pouch with belt loop. Specifications: LEDs: 1 x .05watt LED Luminous Flux: 26 lumens Beam Range: 50 metres Burn Time: 30 hours Batteries: 3 x AAA batteries (included) Weight: 116 grams LED7495

Price: NZ$65.00 NZ$39.00

Sonic LI096223 LED Flood Lamp 12w

Sonic LI096223 LED Flood Lamp 12w EL2040

Price: NZ$149.50 NZ$97.99

Norton Metal Cloth Handy Rolls 80 grit

80 grit, Boxed for easy dispensing 40mm wide / 50 metre rolls

Price: NZ$61.10 NZ$36.00

Norton Metal Cloth Handy Rolls 100 grit

100grit, Boxed for easy dispensing 40mm wide / 50 metre rolls

Price: NZ$59.74 NZ$36.00

Norton Metal Cloth Handy Rolls 120 grit

120 grit, Boxed for easy dispensing 40mm wide / 50 metre rolls

Price: NZ$59.74 NZ$36.00

Noga Deburring Set

Noga Deburring Set Deburrs: Steel,aluminum and plastic Includes handle and 10 S10 blades NONG8150

Price: NZ$38.17 NZ$25.00

First Aid Welders Kit in Steel Case CA9138

Welders First Aid Kit *Designed for welding enviroments *Kit includes plasters, bandages, gauze pads, burn gel, eye dressings, towelettes, cold pack, iodine wipes, CPR protector *Each kit has a contents list, handle and a bracket for wall mounting. FAK209116

Price: NZ$102.81 NZ$69.00

Groz GZ35122 Drill Press Vice 125mm

Groz GZ35122 Drill Press Vice 125mm VC1041

Price: NZ$153.18 NZ$138.00

Groz GZ35121 Drill Press Vice 100mm

Groz GZ35121 Drill Press Vice 100mm VC1040

Price: NZ$145.61 NZ$86.00

Groz Bench Vice 150mm GZ35403

Groz GZ35403 Bench Vice 150mm VC1604

Price: NZ$282.13 NZ$259.00

Groz GZ35402 Bench Vice 125mm

Groz GZ35402 Bench Vice 125mm VC1602

Price: NZ$216.38 NZ$165.00

Record Engineers Vice 4" / 100mm

Replaceable jaws, Fully machined on all load bearing surfaces

Price: NZ$173.67 NZ$129.00

Record Engineers Vice 5" / 125mm

Replaceable jaws, Fully machined on all load bearing surfaces

Price: NZ$383.36 NZ$194.99

Record Engineers Vice 6" / 150mm

Replaceable jaws, Fully machined on all load bearing surfaces

Price: NZ$534.01 NZ$239.00

Bahco 10pc Screwdriver Set

Top quality by Bahco. The Bahco Pro-Cut range features excellent build quality with the Professional in mind and offers ease of use, safety and top quality fit and finish. Blades hardened & tempered. #1, 2 & 3 Phillips. #1 & 2 Square Drive. 3 Slotted & 1 Stumpy.

Price: NZ$55.09 NZ$38.00

TradeQuip Large Long Nose Pliers

280mm Long handled set with 2 x Straight and 2 x bent stored in a wallet, Handy tool for the workshop.

Price: NZ$55.20 NZ$28.00

Bahco Tool Set 1/2Dr & 1/4Dr 77pc

Bahco S800 Socket Set 77 Piece 1/4 & 1/2in Drive BAHS800 S800 Chrome vanadium socket set 77 piece 1/4 and ½ in drive containing:- 15 x ½ in Hexagonal sockets 10, 12, 13, 14, 15, 16, 17, 18, 20, 21, 23, 24, 27, 32 and 34mm. 9 x ½ in AF sockets 3/8, 7/16(11mm), ½, 9/16, 11/16, 3/4(19mm), 13/16, 7/8(22mm) and 1 3/16 in). 4 x ½ in Hexagonal impact sockets 17, 19, 21 and 24mm. 1 x ½ in Sparkplug socket 21mm. 2 x ½ in Extensions 125 and 250mm (5 and 10 in) 1 x ½ in Universal joint. 1 x ½ in Reversible ratchet. 1 x 3/8 in F to ½ in M Adaptor. 12 x 1/4 in Hexagonal sockets 4, 4.4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm. 9 x 1/4 in Deep hexagonal sockets 4, 5, 6, 7, 8, 9, 10, 11 and 13mm. 2 x 1/4 in Extensions 50 and 100mm (2 and 4 in) 1 x 1/4 in T bar 100mm (4 in) 1 x 1/4 in Spinner 1 x 1/4 in Reversible ratchet. 1 x 1.4 in Universal joint 3 x 1/4 in Slotted screwdriver bits 4, 5.5 and 7mm. 4 x 1/4 in Phillips bits PH1, PH2, PH3 and PH4. 6 x 1/4 in Hex bits 3, 4, 5, 6, 8 and 10mm. 3 Hex keys 1.5, 2 and 2.5mm

Price: NZ$219.01 NZ$179.00

TopTul 6pc Impact Driver

1/2DR Impact Driver Set Quick change bit driver 5/16" Hex slotted 1.2mm & 1.6mm, Phillips No2 & No3 In a compact case Toptul 1/2dr Impact Driver GAAD0602

Price: NZ$60.31 NZ$36.00

TradeQuip 4pc Circlip Plier Set

Tradequip 4pc Circlip Plier Set 175mm • 175mm (7"") • Internal, External, Bent & Straight

Price: NZ$28.00 NZ$20.00

Bahco 1/4dr Socket & Bit Set HT4719

An extra-short reversible rachet with a two component handle provides a comfortable grip and good accessibility in cramped spaces. The set contains the smaller socket and bit sizes most commonly used. It includes a reversible ratchet that will make most situations easier to deal with. The box is made of tough HDPE plastic with a cushion insert to keep the contents in position. 4mm - 13mm single hex sockets with 10mm extension, Fine toothed ratchet with soft grip, Torx, Phillips & Hex bits. SL25

Price: NZ$50.08 NZ$39.00

Bahco 1/4dr socket & bit set HT47190

1/4Dr Bit Set with sockets Minature ratchet convenient plastic case 2058/S26

Price: NZ$75.35 NZ$44.00

Monster 113pc Bit Set SD4793

Well this is it, the best value for money for a bit set with just about every bit available Industrial quality tool steel GN310017

Price: NZ$51.04 NZ$29.99

King Tony KT1044 CQ Bit Set 44pc

King Tony KT1044 CQ Bit Set 44pc

Price: NZ$177.10 NZ$112.70

King Tony KT1032CQ01 Bit Set 32Pc + No 2 Square Bit

King Tony KT1032CQ01 Bit Set 32Pc + No 2 Square Bit PA2157

Price: NZ$39.86 NZ$33.35

CRC Marker Pens - Black CP3262

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually 20365

Price: NZ$6.10 NZ$4.90

CRC Marker Pen - Red CP3266

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually Red 20388

Price: NZ$6.10 NZ$4.90

CRC Marker Pen - White CP3260

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually White 20395

Price: NZ$6.10 NZ$4.90

CRC Marker Pen - Yellow CP3264

CRC Marker Pen uses solvent based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox. Features & Benefits •Excellent coverage – Even on black, transparent or very glossy surfaces. Suitable for use on damp or rusted surfaces. •Fast drying – For efficient work flow •Durable tip with valve action – To prevent excess of paint flow •Convenient, medium thickness tip – 4.5mm tip •Easy and clean application •Multi-surface use – Wood, metal, concrete, stone, bricks, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles, etc. •Indoor and outdoor use – Suitable for adverse weather conditions, resistant to UV and water Sold Individually Yellow 20400

Price: NZ$6.10 NZ$4.90

CRC Black Zinc 1 Litre

Black Zinc 1 Litre CP7092

Price: NZ$65.99 NZ$51.80

CRC Red Zinc 400ml Aerosol

CRC Coloured Zinc is a quick drying, primer-less finish with Zinc complexes to give outstanding protection over metal. CRC Coloured Zincs are available in a range of useful colours. Gloss Finish Fuses directly to clean iron or steel surfaces Stops rust and rust creepage even when scratched or abraded Provides 3 years protection against rust in a moderately corrosive outdoor environment Can be applied over CRC Zinc It to extend protection to 6 years Touch dry in 20 minutes. Full cure in 24 hours Protection against corrosion for at least 3 years exposed outdoor metals NZFSA Approved C23

Price: NZ$19.27 NZ$14.80

CRC Yellow Zinc 400ml Aerosol

CRC Coloured Zinc is a quick drying, primer-less finish with Zinc complexes to give outstanding protection over metal. CRC Coloured Zincs are available in a range of useful colours. Gloss Finish Fuses directly to clean iron or steel surfaces Stops rust and rust creepage even when scratched or abraded Provides 3 years protection against rust in a moderately corrosive outdoor environment Can be applied over CRC Zinc It to extend protection to 6 years Touch dry in 20 minutes. Full cure in 24 hours Protection against corrosion for at least 3 years exposed outdoor metals NZFSA Approved C23

Price: NZ$19.27 NZ$14.80

CRC White Zinc 400ml Aerosol

CRC White Zinc 400ml Aerosol CRC Coloured Zinc is a quick drying, primer-less finish with Zinc complexes to give outstanding protection over metal. CRC Coloured Zincs are available in a range of useful colours. Gloss Finish Fuses directly to clean iron or steel surfaces Stops rust and rust creepage even when scratched or abraded Provides 3 years protection against rust in a moderately corrosive outdoor environment Can be applied over CRC Zinc It to extend protection to 6 years Touch dry in 20 minutes. Full cure in 24 hours Protection against corrosion for at least 3 years exposed outdoor metals NZFSA Approved C23

Price: NZ$18.65 NZ$14.80

CRC Blue Zinc 400ml Aerosol

CRC Blue Zinc 400ml Aerosol CRC Coloured Zinc is a quick drying, primer-less finish with Zinc complexes to give outstanding protection over metal. CRC Coloured Zincs are available in a range of useful colours. Gloss Finish Fuses directly to clean iron or steel surfaces Stops rust and rust creepage even when scratched or abraded Provides 3 years protection against rust in a moderately corrosive outdoor environment Can be applied over CRC Zinc It to extend protection to 6 years Touch dry in 20 minutes. Full cure in 24 hours Protection against corrosion for at least 3 years exposed outdoor metals NZFSA Approved C23

Price: NZ$19.27 NZ$14.80

CRC 5.56 Lubricant 4L with Applicator

CRC 5.56 4L Bottle with Applicator CRC 5.56 is a multi-purpose service spray that penetrates, lubricates and prevents corrosion. The original toolkit in a can. CRC 5.56 forms a thin film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment and cleans away scale and dirt. It protects metals from corrosion caused by humidity, salt air and other corrosive atmospheres. Features & Benefits •Lubricates for smooth action – Silences annoying squeaks and squeals •Penetrates quickly – Breaks away rust and corrosion, frees components bonded by dirt and scale •Eliminates the need for many disassembly operations •Protective film – Ongoing protection against corrosion •Displaces moisture to help start wet engines •Preventative maintenance programs – To increase life expectancy of mechanical equipment •Safe for all metals and alloys, most painted surfaces, coatings, plastics and rubbers •Contains no silicone •Cleans grease and tar off painted surfaces •NZFSA Approved C14 CRC 5.56 4L with Applicator 5007

Price: NZ$44.00 NZ$38.00

CRC Black Zinc 400ml Aerosol CP7097

CRC Coloured Zinc is a quick drying, primer-less finish with Zinc complexes to give outstanding protection over metal. CRC Coloured Zincs are available in a range of useful colours. Gloss Finish Fuses directly to clean iron or steel surfaces Stops rust and rust creepage even when scratched or abraded Provides 3 years protection against rust in a moderately corrosive outdoor environment Can be applied over CRC Zinc It to extend protection to 6 years Touch dry in 20 minutes. Full cure in 24 hours Protection against corrosion for at least 3 years exposed outdoor metals NZFSA Approved C23 2089

Price: NZ$19.27 NZ$14.80

CRC Green Zinc 400ml Aerosol

CRC Green Zinc 400ml Aerosol CRC Coloured Zinc is a quick drying, primer-less finish with Zinc complexes to give outstanding protection over metal. CRC Coloured Zincs are available in a range of useful colours. Gloss Finish Fuses directly to clean iron or steel surfaces Stops rust and rust creepage even when scratched or abraded Provides 3 years protection against rust in a moderately corrosive outdoor environment Can be applied over CRC Zinc It to extend protection to 6 years Touch dry in 20 minutes. Full cure in 24 hours Protection against corrosion for at least 3 years exposed outdoor metals NZFSA Approved C23

Price: NZ$19.27 NZ$14.80

CRC Aeroclean Degreaser 500ml (#5070)

CRC Aeroclean Degreaser delivers a concentrated jet of cleaning solution that removes oil and grease from dirty engines. It leaves a detergent on the surface which emulsifies the remaining contaminants when flushed with water. CRC Aeroclean is ideal for all car and truck motors, compressors, boats, lawn mowers, chain saws, farm machinery and construction equipment. After rinsing the motor with water use CRC 5.56 to displace moisture in the distributor and other ignition/electrical parts, if the motor is difficult to start. FEATURES: Highly concentrated jet to penetrate the grease and grime build-up. A unique combination of surfacants, detergents and solvents. Cleans concrete floors and driveways. Non-corrosive. Water wash-off with no residue. Excellent on all automotive engines and mechanical equipment contaminated with grease and grime. 5070

Price: NZ$15.36 NZ$11.10

CRC Penetr8 400g (#5501)

CRC Penetr8 400g (#5501) Hi-speed penetrant, quickly penetrates rusted and seized metal parts, loosening and freeing them instantly.

Price: NZ$24.96 NZ$14.90

CRC Gasket Maker 75g (#8629)

CRC Gasket Maker 75g (#8629) Self forming red silicone gasket.

Price: NZ$12.19 NZ$7.10

CRC Grey RTV Gasket 85g (#8637)

CRC Grey RTV Gasket 85g (#8637) Grey self forming, high temp RTV Silicone Gasket

Price: NZ$12.19 NZ$7.10

Rocol Y515200 Longlife Soluble Oil 4 Litre

Rocol Y515200 Longlife Soluble Oil 4 Litre CP6300

Price: NZ$99.77 NZ$75.00

Galmet Cold Galvanizing Spray Aerosol

Galmet Gold Galvanizing Spray Galmet Cold Galvanizing is an organic zinc-rich coating with over 92% zinc in dry film. Galmet Cold Galvanizing provides long term protection to steel because of the cathodic (galvanic) action between the steel and the metallic zinc in the coating. This action prevents rust from developing under Galmet Cold Galvanizing. It also produces a self healing mechanism where the Galmet Cold Galvanizing is scratched; zinc oxides and carbonates form in the scratch and effectively reseal it. Metallic zinc coatings are universally accepted as the best method of rust prevention. Galmet Cold Galvanizing offers this protection combined with ease of preparation and application. Areas of Application • Welds and damaged galvanizing • Trailers • Tank exteriors • Ducting • Steel Structures • Wrought iron Galmet Cold Galv GGCGA

Price: NZ$26.29 NZ$17.48

King Tony KT1005GQ File Set 200mm 2nd Cut 5pc

King Tony KT1005GQ File Set 200mm 2nd Cut 5pc FL4883

Price: NZ$98.90 NZ$77.05

Bahco 5pc Engineers File Set FL9680

Contains 2 flat files, a round, square & a half round in a handy wallet. 1-478-08-1-2

Price: NZ$80.50 NZ$48.00

King Tony Hacksaw HK5097

Lightweight, resistant to anti oxidization Two blade positions 45° and 90° including flush cut Ergonomics handle with hand stop oil resistant, moisture-resistant KT7911-12

Price: NZ$43.70 NZ$37.00

Bahco Hacksaw HK5108

Alternative 55degree blade mounting for flush cutting Spring tensioned blade loading for quick blade change Comfortable grip 325

Price: NZ$77.51 NZ$59.00

MachineWorks 110pc Tap & Die Set TP7162

110pc Metric Tap & Die Set Consists of 2mm through to 18mm with most pitches A great set made of Tungsten Steel 1300-110000

Price: NZ$305.65 NZ$217.99

TradeQuip Large Long Nose Pliers

280mm Long handled set with 2 x Straight and 2 x bent stored in a wallet, Handy tool for the workshop.

Price: NZ$55.20 NZ$28.00

King Tony Locking Plier Curved Jaw 175mm

King Tony Locking Plier Curved Jaw 175mm

Price: NZ$31.63 NZ$21.74

King Tony Locking Plier Curved Jaw 250mm

King Tony Locking Plier Curved Jaw 250mm

Price: NZ$35.42 NZ$25.19

Tradespro Locking Plier Set 3pc

Tradespro Locking Plier Set 3pc

Price: NZ$26.58 NZ$16.00

King Tony Groove Joint Pliers 400mm

PLIER GROOVE JOINT 400mm/16" KT6511-17C KING TONY

Price: NZ$91.43 NZ$53.50

Stronghand MagSpring™ F-Clamp 90 x 64mm

Capacity : 90mm Throat Depth : 64mm Clamping Pressure : 140kg • The spring-loaded, one-handed clamp with quick-set magnetic V-Pad • Once positioned the Adjustable Magnetic Pad holds the clamp to the workpiece for tightening CLAF-UBV45M

Price: NZ$37.61 NZ$25.00

Stronghand 4-In-1™ F-Clamp 320 x 140mm

Capacity : 320mm Throat Depth : 140mm Clamping Pressure : 1,100kg Rail Size : 30 x 14mm Tapped Hole : M10 • The 4-In-1 Clamp Kit comes complete with the V-Pad and Extender Block accessories • Strong, economical 4-In-1 Utility Clamps adapt to serve four different applications. 1. Standard - Sliding arm clamps are 10x faster than a C Clamp 2. Pipe - Add the exclusive V Pad to create a pipe clamp 3. Spreader - Reverse the clamp arm and create a spreader clamp 4. Step-Over - Add the extender block to create a step-over clamp CLAF-UM125MC3

Price: NZ$186.99 NZ$125.35

Stronghand Ratchet Action F-Clamp 254 x 120mm

Capacity : 254mm Throat Depth : 120mm Clamping Pressure : 450kg Rail Size : 22 x 11mm Tapped Hole : M10 • Ratchet mechanism ensures rapid, vibration and torsion resistant clamping • Has rapid release button, reversible clamp arm, spring stop for removing the clamp arm, 1.1/2" pivoting contact plate with M10 threaded hole (for adding accessories) CLAF-UF100RM

Price: NZ$121.10 NZ$85.00

Stronghand Ratchet Action F-Clamp 178 x 120mm

Capacity : 178mm Throat Depth : 120mm Clamping Pressure : 450kg Rail Size : 22 x 11mm Tapped Hole : M10 • Ratchet mechanism ensures rapid, vibration and torsion resistant clamping • Has rapid release button, reversible clamp arm, spring stop for removing the clamp arm, 1.1/2" pivoting contact plate with M10 threaded hole (for adding accessories) CLAF-UF65RM

Price: NZ$111.09 NZ$75.00

Stronghand Ground Hog™ Clamp 280mm

Amperage / Cable Size : 450A (2/0 - 0.427") Throat Depth : 89mm Clamping Pressure : 180kg • High clamping pressure improves arc stability and reduces power consumption • Prevents current restriction and allows a complete transfer of the electrical current • Controls the electrical current by isolating the contact surface and the cable connection • Get a smooth, continuous arc with no fade, and no heat transfer while improving cable life, and reducing power consumption The Ground Hog • The groove design on the copperhead seals out weld spatter and reduces particle buildup • Side screw provides a secure cable connection • Ground Hog body rotates for cable positioning CLAM-GP2850

Price: NZ$105.17 NZ$68.43

Stronghand Locking C Clamp / Pipe Plier 280mm

Throat Depth : 89mm Diameter : Min 40mm / Max 64mm Thread : M10 • The convenient way to hold round or square tubes for butt-welding • Includes 2 fixed V-Pads on the Pliers adapt to many different shapes & sizes CLAM-PG114VM

Price: NZ$52.56 NZ$35.47

Stronghand Locking C Clamp / Pipe Plier 215mm

Throat Depth : 76mm Diameter : Min 50mm / Max 80mm Thread : M8 • The convenient way to hold round or square tubes for butt-welding • Includes 2 fixed V-Pads on the Pliers adapt to many different shapes & sizes CLAM-PG634V

Price: NZ$48.99 NZ$33.93

Stronghand Corner Magnet 14kg (2pc)

Dimensions : 83 x 95 x 16mm • Create 90° corners by holding from the outside providing you with an unobstructed area for inside tack welds • One side corner relief provides clearance for tail lips • Use the outer edges of the Magnet for setting up materials at 60° MAGC-MST327

Price: NZ$68.43 NZ$45.89

Stronghand Grounding Magnet 300A x 20kg

Dimensions : 50 x 50 x 64mm Amperage : 300A @ 60% Duty Cycle • Sets up quickly and easily - start grounding instantly • Powerful rare earth magnet delivers heavy duty holding power • The V machined surface grips round parts • The copper connector stud is located on top and allows for a full 360° cable rotation • Rugged, compact steel housing for a fast and safe ground, even in tight spots! MAGG-GM203

Price: NZ$163.19 NZ$112.13

Stronghand Snake Magnet 10kg

1 - Flex Cable 450mm 1 - Clamp 2 - Flat Magnetic Pads • The third hand holds, bends, twists MAGS-MFC318

Price: NZ$52.56 NZ$34.99

Stronghand Magnetic V Pad Set 8kg (4pc)

2 - M8 Regular V-Pads (XDV4) 2 - M10 Large V-Pads (XFV4) • Rare-earth Magnetic V-Pads for holding round, flat and square parts in light duty substructure applications PADM-MVDF44

Price: NZ$67.74 NZ$45.89

Stronghand NOMAD™ Welding Table 160kg

Size 760mm x 510mm Capacity 160kg Very affordable Easily moveable Adjustable height TABW-TS3020

Price: NZ$249.00 NZ$194.99

Master Diesel Heater 20kW

Standard Features Thermally protected motor Standard photocell cut off Electronic flame control Possible connection to an optional room thermostat Stainless steel combustion chamber Durable external painted finish Strong long lasting construction Housing remains cool to the touch Easy to move High air displacement Easy maintenance Ventilation of the room is necessary to prevent a deficiency in oxygen supply. Capacity kW 20 Btu/h 70.000 Kcal/h 17.500 Fuel diesel/kerosene oil Fuel Consumption kg/h 1.70 Tank Capacity Iitres 19 Air Displacement m3/h 400 Current Type AC Voltage/Frequency V/Hz 230/50 Electrical Power kW 0.09 Energy Consumption Amp 1.12 Master 20kw diesel heater B70CED

Price: NZ$1092.50 NZ$899.00

Master Heater 44kw Diesel

Thermally protected motor Standard photocell cut off Electronic flame control Possible connection to an optional room thermostat Stainless steel combustion chamber Durable external painted finish Strong long lasting construction Housing remains cool to the touch Easy to move High air displacement Easy maintenance Ventilation of the room is necessary to prevent a deficiency in oxygen supply. Capacity kW 44 Btu/h 150.000 Kcal/h 38.000 Fuel diesel/kerosene oil Fuel Consumption kg/h 3.72 Tank Capacity Iitres 43 Air Displacement m3/h 900 Current Type AC Voltage/Frequency V/Hz 230/50 Electrical Power kW 0.19 Energy Consumption Amp 2 Master Heater 44kw Diesel B150CED

Price: NZ$1405.30 NZ$1145.00

Master Infra Red Heater XL6

Master Infra Red Heater Uses Diesel Fuel, 17 Kw capacity, 10 hours operation. 14 litres Tank capacity.

Price: NZ$1135.05 NZ$997.99

Unotec 43kw Diesel Heater MC0659

Features: Perimeter safety cage Photocell flame sensor Automatic electric safety control device Overheat sensor Stainless steel combustion chamber High air displacement Housing remains cool to touch **ventilation of the room is necessary to prevent a deficiency in oxygen supply. Kw 43 Air output m 3/h 1050 Fuel diesel/kerosene Fuel Consumption l/h 3 Tank Capacity L 42 Electrical Supply V 230 Hz 50 Wheel Kit supplied Weight kg 37 Unotec 43kw Heater DH40

Price: NZ$998.99 NZ$798.00

Hindin Maquip 16RSE 16cfm Compressor

3 Cylinder Single Phase 3hp Belt Driven, 15amp Plug, 281 litres per minute Free Air Delivery. Equipped with continuous run capacity to save stop start the electric motor.Made in Italy. Assembled in New Zealand. One of the best available Compressors on the market.

Price: NZ$1838.99 NZ$1920.01

Air Command 12CFM Compressor

12 CFM Pump displacement, 251 litres of air a minute at the hose, 50 litre tank capacity, New dashboard. Slightly different from picture.

Price: NZ$899.00 NZ$768.99

Ampro Mini Die Grinder 1/4" Collet

Ampro Mini Die Grinder 1/4" Collet

Price: NZ$102.94 NZ$68.89

Ampro 1/2"Dr Air Ratchet Wrench

Ampro 1/2"Dr Air Ratchet Wrench

Price: NZ$131.87 NZ$115.00

TopTul Interchangeable Crimping Tool Set 6pce

TopTul Interchangeable Crimping Tool Set 6pce

Price: NZ$151.00 NZ$151.00

Bahco Trade 200mm Long Nose Pliers

Bahco Trade 200mm Long Nose Pliers

Price: NZ$73.21 NZ$55.20

Bahco Trade 180mm Side Cutter Pliers

Bahco Trade 180mm Side Cutter

Price: NZ$77.21 NZ$55.20

Bahco 200mm Linesman Trade Pliers

Bahco 200mm Linesman Trade Pliers

Price: NZ$70.61 NZ$55.20

Bahco General Purpose Knife 210mm

Bahco General Purpose Knife 210mm with Holster

Price: NZ$16.91 NZ$9.99

King Tony 12" Hacksaw

KING TONY 12" HACKSAW

Price: NZ$43.70 NZ$37.00

Panasonic 18 Volt Hammer Drill

The Panasonic EY7950LR2S is part of the new 18V Tough Tool IP Range and therefore is prepared for the most extreme conditions! Built with exceptional resistance to dust and water the Tough Tool IP range will keep on going, minimising your down time and delays caused by malfunction. Features high capacity 3.3Ah (3.5Ah Typical) Li-ion batteries. The new 4 pole motor with 4 brushes delivers outstanding performance in both speed stability and torque. It is designed for high resistance against overheating to reach exceptional durability. With 29,700bpm it drills through masonry / domestic brick with ease. All steel gearing reduces wear on key drivetrain components increasing durability in the toughest conditions. The motor is specifically designed to give high cooling efficiency ensuring that even when working hard the EY7950&39;s motor temperature stays low. The many features of the EY7950 such as LED work light, low battery warning light and an overheat warning light, make it perfect for the professional user. To meet the need of the professional tradesman, all Panasonic cordless power tools are carefully constructed based on four basic principles: Cordless capability, Power, Lightweight and Ergonomic design. For your comfort, the advanced ergonomic design of Panasonic tools means they&39;re compact, well balanced and easy to operate for extended periods of time without fatigue. Successfully combining technology with durability, these lightweight tools are full of helpful features and provide reliable solutions that tradesmen can utilise for all their construction needs. The IP standard this Panasonic range carries is awarded by the International Electrotechnical Commission (IEC). The IP standards test is designed to gauge the level of protection each product offers against dust and water in the toughest conditions. The EY7950LR2S uses lithium-ion battery technology which has a number of advantages, the batteries have no memory effect which allows them to be recharged before they are completely discharged, they are up to 40% lighter than an NiCD or NiMH battery and they also maintain their charge noticeably longer which provides increased productivity. SPECIFICATIONS: • 2 x 3.3Ah Li-ion Batteries • 1 Hour Charger • Rotary/Rotary Hammer • 13mm Keyless Chuck • Variable Speed • Reverse Action • 2 Speed Gearbox • 54Nm Max Torque • 18 Position Torque Settings • Drilling Capacity 36mm (Wood) • Drilling Capacity 13mm (Metal) • Drilling Capacity 13mm (Masonry) • No Load Speed 0-1650 • Weight 2.3kg • Carry Case • 1 Year Warranty

Price: NZ$583.99 NZ$484.00

Bahco 5pc Engineers File Set FL9680

Contains 2 flat files, a round, square & a half round in a handy wallet. 1-478-08-1-2

Price: NZ$80.50 NZ$48.00

King Tony KT1005GQ File Set 200mm 2nd Cut 5pc

King Tony KT1005GQ File Set 200mm 2nd Cut 5pc FL4883

Price: NZ$98.90 NZ$77.05

Powerbuilt 13pc Metric Reversible Gear Spanner Set HT8920

Built to exceed ANSI specifications Heat treated, drop forged, chrome vanadium steel, fully polished Box end offers 72 teeth gear and Z-Drive to contact the flat wall of fasteners for a stronger grip Chamfered open end for easy access Works with just 5 degree swing Packaged in a innovative storage holder Includes 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 21mm, 22m, 24mm Powerbuilt 13pc gear spanner set WC6013

Price: NZ$241.50 NZ$239.00

Powerbuilt 7pc Metric Gear Spanner Set HT8919

Built to exceed ANSI specifications Heat treated, drop forged, chrome vanadium steel, fully polished Box end offers 72 teeth gear and Z-Drive to contact the flat wall of fasteners for a stronger grip Chamfered open end for easy access Works with just 5 degree swing Packaged in a innovative storage holder Includes 8mm, 10mm, 12mm, 13mm, 14mm, 16mm, 17mm WC0346

Price: NZ$118.99 NZ$98.99

Bahco 3pc Reversible Ratchet Spanner Set

3 piece reversible ratchet Set 12 sizes 8mm - 19mm In a handy pouch S4RM/3T

Price: NZ$90.98 NZ$75.00

King Tony KT12112MR Speed Wrench Set 12pc 8 - 24mm

King Tony KT12112MR Speed Wrench Set 12pc 8 - 24mm HT99191

Price: NZ$309.35 NZ$319.00

King Tony KT20107SR Ballhead Set Imperial

King Tony KT20107SR Ballhead Set Imperial UN9952

Price: NZ$35.65 NZ$22.43

King Tony KT20107MR01 Ballhead Key Set Metric

King Tony KT20107MR01 Ballhead Key Set Metric UN9950

Price: NZ$35.65 NZ$22.43

Bondus Ballhead Pack - Metric & Imperial

Bondus Ballhead Pack - Contains metric & imperial packs of the commonly used key sizes.

Price: NZ$98.23 NZ$69.00

Bonhus 9pc Metric Hex Key Set

Worlds strongest steel, Precise fit in screw, Ball end.

Price: NZ$50.09 NZ$32.00

Powerbuilt 9pc metric hex key set UN7704

For loosening and tightening Hex head screws The Ball End allows use at angles up to 25 degree and greatly increases versatility Heat treated precision machined chrome vanadium steel keys slide into an indexed plastic storage case Metric - 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm Powerbuilt 9pc metric hex key set 640082HS

Price: NZ$44.46 NZ$15.00

Powerbuilt 9pc imperial hex key set UN7703

For loosening and tightening Hex head screws The Ball End allows use at angles up to 25 degree and greatly increases versatility Heat treated precision machined chrome vanadium steel keys slide into an indexed plastic storage case Imperial - 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8” Powerbuilt 9pc imperial hex key set 640081HS

Price: NZ$40.32 NZ$15.00

King Tony Ball Key Set Long 9pc Metric

King Tony Ball Key Set Long 9pc Metric

Price: NZ$29.90 NZ$28.64

Limit Combination Square Set

With protractor Angle head and centre head sliding on the rule Spirit level on angle head and protractor In a plastic box 119180107

Price: NZ$124.99 NZ$99.00

Mitutoyo Fine Adjustment Magnetic Base

These stands accept all dial indicators, The on/off switch offers instant mounting and dismounting.

Price: NZ$174.80 NZ$76.00

Mitutoyo Standard Magnetic Base

These stands accept all dial indicators, The on/off switch offers instant mounting and dismounting.

Price: NZ$142.09 NZ$69.00

Toptul 1/4dr 6-30Nm Torque Wrench ME0010

6 - 30Nm Steel Ratchet Head Reverse ratchet action function Push to lock/pull to unlock feature Easy to Use 350mm long ANAF0803

Price: NZ$121.65 NZ$95.00

TopTul 3/8 Dr 19-110Nm Torque Wrench ME0011

19 - 110Nm Steel Ratchet Head Reverse Ratchet Action Function Push to lock/pull to unlock system Easy to use 385mm long ANAF1211

Price: NZ$131.87 NZ$100.00

TopTul 1/2Dr 40-210Nm Torque Wrench ME0012

40Nm - 210Nm Easy to use Steel Ratchet Head Reverse ratchet action function Push to lock/pull to unlock scale setting feature 535mm long ANAF1621

Price: NZ$142.09 NZ$105.00

TopTul 3/4Dr Torque Wrench

100Nm - 500Nm Easy to use Steel Ratchet Head Reverse ratchet action function Push to lock/pull to unlock scale setting feature 865mm long

Price: NZ$295.42 NZ$194.99

Limit 150mm Digital Caliper ME3795

Limit 150mm Digital Caliper Hardened stainless steel Zero set in any position with Auto Off 0.01mm/0.0005" 144550100

Price: NZ$109.00 NZ$78.99

Starrett 12"/300mm Vernier Caliper

Starrett 125MEA-12/300 Vernier Caliper, 0-12"/0-300mm Range, +/-0.0005" Accuracy, 0.001"/0.02mm Graduation, In Plastic Case

Price: NZ$391.00 NZ$256.00

Starrett Magnetic Angle Meter

AM-2 Angle Meter, 5"X5" Magnetic Base And BackItem # 921208 •Magnetic base frees hands when used on ferrous surfaces •Measures any angle for pitch or slope

Price: NZ$78.89 NZ$19.00

Starrett Dial Indicator

3025-481 Dial Indicator · Tolerance hands and bezel lock. · Long life jewel bearings. · Lug-on-center back. · Dial Indicator (Range 10mm)(Graduation 0.01mm)(Dial Reading 0-100 )

Price: NZ$92.00 NZ$73.99

Starrett Mag Base 3657AA

Starrett 3657aa Magnetic Base Indicator Holder Accommodates all Starrett test, back-plunger, AGD, dial and miniature-dial indicators as well as similar indicators of other manufacturers. Features: ■Designed for use with dial indicators ■Incorporating an on/off switch which controls the powerful magnetic base ■Can be adjusted to any position and locked ■Magnetic base, upright base post, snug, rod, indicator attachment and snug complete - 6.4 mm (1/4 Inch) and 9.5 mm (3/8 Inch) holes ■Fine adjustment

Price: NZ$89.00 NZ$73.99

Leatherman Wingman HT8620

Length: 9.7cm Weight: 198.4g Blade Length: 6.6cm Tools & Blades: Spring-Action Needlenose Pliers Spring-Action Regular Pliers Wire Cutters 420HC Combo Knife Package Opener Wood / Metal File Ruler Small Screwdriver Medium Screwdriver Phillips Screwdriver Bottle Opener Can Opener Wire Stripper Scissors Removable Pocket Clip LE831436

Price: NZ$76.48 NZ$49.00

TradeQuip Mig Pliers

Mig Welding Pliers, Splatter removal,Wire cutting, Nozzle removal, Insulation, Wire drawing out.

Price: NZ$32.09 NZ$15.00

TradeQuip Large Long Nose Pliers

280mm Long handled set with 2 x Straight and 2 x bent stored in a wallet, Handy tool for the workshop.

Price: NZ$55.20 NZ$28.00

King Tony KT42114GP Circlip Plier Set 4pc

King Tony KT42114GP Circlip Plier Set 4pc HT9972

Price: NZ$143.75 NZ$102.35

Fuller 405-1928 8" Long Nose Plier

Fuller 405-1928 8" Long Nose Plier HT2584

Price: NZ$17.25 NZ$15.00

Fuller 405-1907 7" Side Cutting Plier

Fuller 405-1907 7" Side Cutting Plier HT2552

Price: NZ$20.47 NZ$15.00

King Tony KT6655-09 Chain Grip Plier 225mm

King Tony KT6655-09 Chain Grip Plier 225mm HT9935

Price: NZ$66.70 NZ$44.85

King Tony KT6311-08 Long Nose Plier 203mm

King Tony KT6311-08 Long Nose Plier 203mm HT9997

Price: NZ$38.41 NZ$20.70

King Tony KT6111-08 Linesman Plier 213mm

King Tony KT6111-08 Linesman Plier 213mm HT9992

Price: NZ$40.48 NZ$20.70

King Tony KT6231-08 Diagonal Plier 200mm

King Tony KT6231-08 Diagonal Plier 200mm HT9995

Price: NZ$37.03 NZ$20.70

Fuller Pro 8" / 200mm Linesman Plier HT2588

Fuller Pro 8" / 200mm Combination Pliers HT2588

Price: NZ$22.72 NZ$15.00

Fuller Pro 16" / 406mm Pump Pliers HT2594

Choice of 6 jaw openings Sure Gripping Precision milled jaws Comfortable Rubber Grips 400-0117

Price: NZ$51.75 NZ$36.00

Irwin Locking Plier Straight Jaw with Wire Cutter

Irwin Locking Plier Straight Jaw with Wire Cutter 10"/250mm

Price: NZ$60.26 NZ$29.99

Irwin Locking Plier Curved Jaw

Irwin Locking Plier Curved Jaw -250mm (10CR)

Price: NZ$42.44 NZ$28.03

Irwin Sheet Metal Locking Plier

Irwin Sheet Metal Locking Plier (8R)

Price: NZ$68.80 NZ$34.99

Fuller 408-6202 Automatic Wire Stripper

Fuller 408-6202 Automatic Wire Stripper HT4589

Price: NZ$46.18 NZ$39.00

King Tony Locking Plier Curved Jaw 175mm

King Tony Locking Plier Curved Jaw 175mm

Price: NZ$31.63 NZ$21.74

King Tony Locking Plier Curved Jaw 250mm

King Tony Locking Plier Curved Jaw 250mm

Price: NZ$35.42 NZ$25.19

Tradespro Locking Plier Set 3pc

Tradespro Locking Plier Set 3pc

Price: NZ$26.58 NZ$16.00

TradeQuip 4pc Circlip Plier Set

Tradequip 4pc Circlip Plier Set 175mm • 175mm (7"") • Internal, External, Bent & Straight

Price: NZ$28.00 NZ$20.00

European Style Line Diagonal Cutting Nipper 163mm

Price: NZ$30.25 NZ$18.40

King Tony Diag Cut Nippers 183mm

King Tony Diag Cut Nippers Heavy Duty 183mm

Price: NZ$35.77 NZ$18.34

King Tony Long Nose Pliers 175mm

PLIER LONG NOSE 175mm/7" KT6311-06 KING TONY

Price: NZ$32.19 NZ$18.40

King Tony Groove Joint Pliers 250mm

PLIER GROOVE JOINT 250mm/10" KT6511-10C KING TONY

Price: NZ$49.34 NZ$31.10

King Tony Groove Joint Pliers 325mm

PLIER GROOVE JOINT 300mm/12" KT6511-13C KING TONY

Price: NZ$58.65 NZ$34.99

King Tony Groove Joint Pliers 400mm

PLIER GROOVE JOINT 400mm/16" KT6511-17C KING TONY

Price: NZ$91.43 NZ$53.50

Powerbuilt 125mm Flat Nose Plier

Powerbuilt 125mm Flat Nose Plier Stainless Steel

Price: NZ$16.31 NZ$6.00

King Tony Groove Joint Pliers 400mm

PLIER GROOVE JOINT 400mm/16" KT6511-17C KING TONY

Price: NZ$91.43 NZ$53.50

Bahco 3pc Pry Bar Set

Contains 4 pry bars 6x200mm 10x300mm 11x450mm 11x600mm Ergo grip handles 2484/S4

Price: NZ$39.86 NZ$32.99

Torin PULD-10L 10 Ton Hydraulic Dent Puller

Torin PULD-10L 10 Ton Hydraulic Dent Puller MC51300

Price: NZ$397.65 NZ$369.00

King Tony 6pc Pin Punch Set PU6852

6pc Pin Punch Set Sizes Include: 2 x 30 , 3 x 40 , 4 x 50 , 5 x 50 , 6 x 50 , 8 x 50 mm KT1006PR

Price: NZ$63.48 NZ$39.91

King Tony 4pc Chisel Set on Stand

4pc Chisel set containg top quality falt chisels 17mm, 21mm, 24mm, 29mm In a sturdy metal stand KT11104PR

Price: NZ$80.50 NZ$57.39

Garvin Combination 13pc Pin Punch Set PU3050

Garvin combination pin punch set 13pc 8Pc 1/16" - 5/16" (4"/100mm) Drive Pin Punch 5Pc 1/8", 3/16", 1/4", 5/16" & 3/8" (8"/200mm) Long Drive Pin Punch A Very Popular Set with all the popular sizes of Punches. GPS-0506

Price: NZ$44.51 NZ$39.00

King Tony Industrial Lever Riveter 450mm

King Tony Industrial Lever Riveter 450mm

Price: NZ$142.60 NZ$97.75

Bahco 10pc Screwdriver Set

Top quality by Bahco. The Bahco Pro-Cut range features excellent build quality with the Professional in mind and offers ease of use, safety and top quality fit and finish. Blades hardened & tempered. #1, 2 & 3 Phillips. #1 & 2 Square Drive. 3 Slotted & 1 Stumpy.

Price: NZ$55.09 NZ$38.00

SKG SKG6715C Screwdriver Phillips/Pozidrive

SKG SKG6715C Screwdriver Phillips/Pozidrive SD1473

Price: NZ$33.40 NZ$27.00

TopTul 3pc Long Screwdriver Set

Screwdriver Set Extra Long 3piece, Slotted 5.5 x 400mm, 6.5 x 400mm, Phillips 1 x 400mm, Cushion super grip handles

Price: NZ$42.02 NZ$29.99

King Tony KT30206MR ScrewDriver Set Heavy Duty 6pc

King Tony KT30206MR ScrewDriver Set Heavy Duty 6pc SD1472

Price: NZ$110.38 NZ$56.35

Screwdriver Set 7pc Insulated Fuller

Screwdriver Set 7pc Insulated Fuller

Price: NZ$39.42 NZ$28.99

Stanley 10pc Screwdriver Set

Cushion grip, Magnetic tips, In a blow moulded case.

Price: NZ$55.09 NZ$34.99

King Tony 7pc Screwdriver Set Metric

King Tony 7pc Screwdriver Set Metric

Price: NZ$64.40 NZ$44.85

Torin Porta Power 10 Ton

10 Ton Porta Power with 8 assorted fittings and feet attachments, Comes in a stury metal case.

Price: NZ$397.65 NZ$369.00

Torin 10 ton Porta Power MC51300

Min ram height 470mm Ram lifting height 150mm Net weight 31kg T71001S

Price: NZ$397.65 NZ$369.00

Torin 20 Ton Bottle Jack

20 Ton Low Profile Bottle Jack with a minimum height of 168mm and maximum of 245mm, with carry handle.

Price: NZ$135.70 NZ$89.00

Torin 3 Ton Low Profile Trolley Jack

3 Ton Trolley Jack can be lowered to 85mm to get into those hard to reach places, Maximun height 455mm.

Price: NZ$254.53 NZ$187.99

Torin 20 Ton Bottle Jack

20 Ton Low Profile Bottle Jack with a minimum height of 168mm and maximum of 245mm, with carry handle.

Price: NZ$135.70 NZ$89.00

Bahco Cantilever Tool Box TB1755

Bahco 5 tray cantilever tool box empty OEL5TCB 40cm x 60cm x 40cm

Price: NZ$79.90 NZ$45.00

Kincrome Trailer Lock Box

Trailer Lock Box Size 830mm x 450mm x 375mm. Designed to fit snugly on a Trailer Draw Bar. Lockable.

Price: NZ$489.00 NZ$299.00

Powerbuilt 9 drawer Tool Chest

A 9 drawer Tool Chest with heavy duty ball bearing slides and in Canterbury Coulours.

Price: NZ$299.00 NZ$299.00

Powerbuilt 9 Drawer Tool Chest TB5263

9 Drawer Tool Chest Heavy duty side handles Internal Locking System Powder coat finish Removable Tool Tray and protective drawer liners Easy move, full drawer extension ball bearing slides on all drawers Full length Aluminium extrusion drawer handle with label and PVC strip to list contents of drawer Dividers in the top lid storage allows changing storage spaces at your requirement Rubber feet on the bottom four corners to prevent chest from slipping WIDTH 660mm DEPTH 310mm HEIGHT 430mm WEIGHT 27kg NW CC0332

Price: NZ$407.87 NZ$399.00

Powerbuilt 205pc Tool Chest Kit

Powerbuilt 205pc Tool Chest Kit, 6 Drawer Tool Chest, 37pc Ratchet Driver Kit, 84pc Socket & Driver Tray, 30pc Plier, Hex Key & Wrench Tray, 17pc R&OE Spanners, 7pc soft grip screwdriver tray, 8pc Ratchet Wrench Set, 8pc Jewellers Screwdriver Set, plus a bit set.

Price: NZ$1252.49 NZ$869.00

Powerbuilt 206pc Tool Kit

6 Drawer Tool Chest, 37pc Ratchet Driver Kit, 84pc Socket & Driver Tray, 30pc Plier, Hex Key & Wrench Tray, 17pc R&OE Spanners, 7pc soft grip screwdriver tray plus a 30pc Screwdriver Set. *****************FREE TEE SHIRT FOR MAY***************

Price: NZ$1162.87 NZ$999.01

King Tony 219pc Tool box & Tools HT9850

219pc King Tony Tools and Tool Box Metric and Imperial top tray Circlip plier tray 1/4dr Metric and Imperial socket tray Hammer, offset spanners, spanners, punches tray Screwdrivers, pliers and hex key tray Offset spanners, spanners and adjustable wrench tray Groove joint plier and locking plier tray - 1 top tray - 3 small trays - 3 larger trays (every drawer has a tray full) KT911-000CR

Price: NZ$1399.00 NZ$1095.00

Powerbuilt 1/2dr 76pc Metric Tool Kit HT1946

Socket Set Contains: 1/2” Dr (12pt Std) 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 34mm, 35mm, 36mm 1/2” Dr 125mm Extension 1/2” Dr Universal Joint 1/2” Dr 430mm/17” Power Bar 1/2” Dr x 5/8”, 13/16” Spark Plug Sockets 1/2" Dr Gear to Gear Ratchet (60T) Ball End Hex Keys 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm Long Series Ring & Open End Spanners 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Bit Driver Bits (25mm L) Phillips #0 #1, #2 (3), #3 Slotted 2.5mm, 3mm, 4mm, 5mm, 6mm Pozi #1, #2 (2) Torx T-10, T-15, T-20, T-25, T-27, T-30, T-40 Robertson #1, #2 (2) Packaged in a blow moulded case KBT1173

Price: NZ$225.00 NZ$228.00

Hitachi Metal Cut Off Saw CC14SF 2000w

Hitachi Metal Cut Off Saw CC14SF 2000w (Quick release vice, spindle lock, cut steel upto 130x130mm)

Price: NZ$478.40 NZ$368.00

Makita 2414NB 355mm Metal Chop Saw PT5299

D-shape handle for easy gripping Spark diversion guard for operators safety Adjustable guide plate 45° right and left at 3 locations Quick release vise Convenient storage space for wrench Adjustable depth stop Specifications: Wheel diameter 355mm (14") Hole diameter 25.4mm Continuous rating input 2,400W No load speed 3,800rpm Overall dimensions (LxWxH) 500mm x 600mm x 280mm Net weight 16.2kg Power supply cord 2m Carbon brush CB203 2414NB

Price: NZ$529.00 NZ$439.99

Evolution 35mm Magnetic Base Drill PT7208

*****FREE CUTTER SET ONLY WHILE STOCKS LAST***** 1200 watt motor Max cutting diameter 35mm Max cutting depth 50mm Weight 12.7kg Comes with: Coolant tank Coolant pipe Guard Carry Case HT1ME3500

Price: NZ$1495.00 NZ$1450.00

Bosch MultiTool GOP250CE

A universe full of possibilities – The blue problem solver ■Powerful 250-watt motor with Constant Electronic for constant work progress in every application ■Slim grip circumference for more comfortable working in precision applications and continuous use ■Easy, precise positioning on the workpiece due to oscillating motion. This enables accurate cutting and prevents damage to high-quality work materials ■Speed preselection for perfect adjustment to suit different accessories and work materials ■Extensive range of accessories offers solutions for many applications ■Rubber-coated handle surfaces enable comfortable work in different positions ■Integrated ball grommet increases flexibility and prevents cable breaks

Price: NZ$284.05 NZ$237.99

Panasonic 18 Volt Hammer Drill

The Panasonic EY7950LR2S is part of the new 18V Tough Tool IP Range and therefore is prepared for the most extreme conditions! Built with exceptional resistance to dust and water the Tough Tool IP range will keep on going, minimising your down time and delays caused by malfunction. Features high capacity 3.3Ah (3.5Ah Typical) Li-ion batteries. The new 4 pole motor with 4 brushes delivers outstanding performance in both speed stability and torque. It is designed for high resistance against overheating to reach exceptional durability. With 29,700bpm it drills through masonry / domestic brick with ease. All steel gearing reduces wear on key drivetrain components increasing durability in the toughest conditions. The motor is specifically designed to give high cooling efficiency ensuring that even when working hard the EY7950&39;s motor temperature stays low. The many features of the EY7950 such as LED work light, low battery warning light and an overheat warning light, make it perfect for the professional user. To meet the need of the professional tradesman, all Panasonic cordless power tools are carefully constructed based on four basic principles: Cordless capability, Power, Lightweight and Ergonomic design. For your comfort, the advanced ergonomic design of Panasonic tools means they&39;re compact, well balanced and easy to operate for extended periods of time without fatigue. Successfully combining technology with durability, these lightweight tools are full of helpful features and provide reliable solutions that tradesmen can utilise for all their construction needs. The IP standard this Panasonic range carries is awarded by the International Electrotechnical Commission (IEC). The IP standards test is designed to gauge the level of protection each product offers against dust and water in the toughest conditions. The EY7950LR2S uses lithium-ion battery technology which has a number of advantages, the batteries have no memory effect which allows them to be recharged before they are completely discharged, they are up to 40% lighter than an NiCD or NiMH battery and they also maintain their charge noticeably longer which provides increased productivity. SPECIFICATIONS: • 2 x 3.3Ah Li-ion Batteries • 1 Hour Charger • Rotary/Rotary Hammer • 13mm Keyless Chuck • Variable Speed • Reverse Action • 2 Speed Gearbox • 54Nm Max Torque • 18 Position Torque Settings • Drilling Capacity 36mm (Wood) • Drilling Capacity 13mm (Metal) • Drilling Capacity 13mm (Masonry) • No Load Speed 0-1650 • Weight 2.3kg • Carry Case • 1 Year Warranty

Price: NZ$583.99 NZ$484.00

TradeQuip Mig Pliers

Mig Welding Pliers, Splatter removal,Wire cutting, Nozzle removal, Insulation, Wire drawing out.

Price: NZ$32.09 NZ$15.00

WeldWell Automatic Welding Helmet

Grinder mode, Darkened State No9-13, Low battery indicator,Auto power off.

Price: NZ$148.99 NZ$118.99

Norton Kevlar Welding Gloves SE2370

Kevlar stitched seams for resistance to spark burn and to prevent premature failure. AS363030

Price: NZ$24.20 NZ$14.00

King Tony Locking Plier Curved Jaw 175mm

King Tony Locking Plier Curved Jaw 175mm

Price: NZ$31.63 NZ$21.74

King Tony Locking Plier Curved Jaw 250mm

King Tony Locking Plier Curved Jaw 250mm

Price: NZ$35.42 NZ$25.19

Stronghand MagSpring™ F-Clamp 90 x 64mm

Capacity : 90mm Throat Depth : 64mm Clamping Pressure : 140kg • The spring-loaded, one-handed clamp with quick-set magnetic V-Pad • Once positioned the Adjustable Magnetic Pad holds the clamp to the workpiece for tightening CLAF-UBV45M

Price: NZ$37.61 NZ$25.00

Stronghand Ratchet Action F-Clamp 254 x 120mm

Capacity : 254mm Throat Depth : 120mm Clamping Pressure : 450kg Rail Size : 22 x 11mm Tapped Hole : M10 • Ratchet mechanism ensures rapid, vibration and torsion resistant clamping • Has rapid release button, reversible clamp arm, spring stop for removing the clamp arm, 1.1/2" pivoting contact plate with M10 threaded hole (for adding accessories) CLAF-UF100RM

Price: NZ$121.10 NZ$85.00

Stronghand 4-In-1™ F-Clamp 320 x 140mm

Capacity : 320mm Throat Depth : 140mm Clamping Pressure : 1,100kg Rail Size : 30 x 14mm Tapped Hole : M10 • The 4-In-1 Clamp Kit comes complete with the V-Pad and Extender Block accessories • Strong, economical 4-In-1 Utility Clamps adapt to serve four different applications. 1. Standard - Sliding arm clamps are 10x faster than a C Clamp 2. Pipe - Add the exclusive V Pad to create a pipe clamp 3. Spreader - Reverse the clamp arm and create a spreader clamp 4. Step-Over - Add the extender block to create a step-over clamp CLAF-UM125MC3

Price: NZ$186.99 NZ$125.35

Stronghand Ratchet Action F-Clamp 178 x 120mm

Capacity : 178mm Throat Depth : 120mm Clamping Pressure : 450kg Rail Size : 22 x 11mm Tapped Hole : M10 • Ratchet mechanism ensures rapid, vibration and torsion resistant clamping • Has rapid release button, reversible clamp arm, spring stop for removing the clamp arm, 1.1/2" pivoting contact plate with M10 threaded hole (for adding accessories) CLAF-UF65RM

Price: NZ$111.09 NZ$75.00

Stronghand Ground Hog™ Clamp 280mm

Amperage / Cable Size : 450A (2/0 - 0.427") Throat Depth : 89mm Clamping Pressure : 180kg • High clamping pressure improves arc stability and reduces power consumption • Prevents current restriction and allows a complete transfer of the electrical current • Controls the electrical current by isolating the contact surface and the cable connection • Get a smooth, continuous arc with no fade, and no heat transfer while improving cable life, and reducing power consumption The Ground Hog • The groove design on the copperhead seals out weld spatter and reduces particle buildup • Side screw provides a secure cable connection • Ground Hog body rotates for cable positioning CLAM-GP2850

Price: NZ$105.17 NZ$68.43

Stronghand Locking C Clamp / Pipe Plier 280mm

Throat Depth : 89mm Diameter : Min 40mm / Max 64mm Thread : M10 • The convenient way to hold round or square tubes for butt-welding • Includes 2 fixed V-Pads on the Pliers adapt to many different shapes & sizes CLAM-PG114VM

Price: NZ$52.56 NZ$35.47

Stronghand Locking C Clamp / Pipe Plier 215mm

Throat Depth : 76mm Diameter : Min 50mm / Max 80mm Thread : M8 • The convenient way to hold round or square tubes for butt-welding • Includes 2 fixed V-Pads on the Pliers adapt to many different shapes & sizes CLAM-PG634V

Price: NZ$48.99 NZ$33.93

Stronghand Grounding Magnet 300A x 20kg

Dimensions : 50 x 50 x 64mm Amperage : 300A @ 60% Duty Cycle • Sets up quickly and easily - start grounding instantly • Powerful rare earth magnet delivers heavy duty holding power • The V machined surface grips round parts • The copper connector stud is located on top and allows for a full 360° cable rotation • Rugged, compact steel housing for a fast and safe ground, even in tight spots! MAGG-GM203

Price: NZ$163.19 NZ$112.13

Stronghand Snake Magnet 10kg

1 - Flex Cable 450mm 1 - Clamp 2 - Flat Magnetic Pads • The third hand holds, bends, twists MAGS-MFC318

Price: NZ$52.56 NZ$34.99

Stronghand Magnetic V Pad Set 8kg (4pc)

2 - M8 Regular V-Pads (XDV4) 2 - M10 Large V-Pads (XFV4) • Rare-earth Magnetic V-Pads for holding round, flat and square parts in light duty substructure applications PADM-MVDF44

Price: NZ$67.74 NZ$45.89

Stronghand NOMAD™ Welding Table 160kg

Size 760mm x 510mm Capacity 160kg Very affordable Easily moveable Adjustable height TABW-TS3020

Price: NZ$249.00 NZ$194.99

Xcel-Arc 140amp MMA/TIG DC Welding Machine WE2000

Small, Lightweight and Portable Welds: Steels, Stainless, Cast Iron, Bronze, Copper Features • Latest IGBT inverter technology • MMA (stick electrode welding) • Hot start (improves electrode starting) • Arc Force (boosts current to prevent electrode extinguishing) • Excellent arc stability with all electrodes • DC TIG • Lift Arc ignition (prevents tungsten sticking during arc ignition) • Ultra smooth DC TIG welding current • Thermal overload protection • IP21S rating for environmental/safety protection • Generator compatible (recommend 6.0KVA minimum) • Tolerant to variable power supplies The XA-ARC140 is an exceptional machine that is suitable for a wide range of applications including light industrial use, site welding, farming, along with repair and maintenance applications. The XA-Arc140 is packaged in a tough PVC carry case with MMA accessories. Manufactured in compliance to AS/NZ60974.1 2 Year Warranty XA-ARC140LA

Price: NZ$494.99 NZ$398.99

OEM 1/2dr 600mm/24" Long Power Bar HT3900

OEM Powerbar Extra Long 24" / 600mm Chrome vanadium for extra strength Used for stubborn nuts and bolts 27121

Price: NZ$62.08 NZ$38.00

King Tony 1/2Dr Deep Metric Socket Set

KING TONY 1/2dr 15pc D/HEX METRIC DEEP SOCKET SET

Price: NZ$145.99 NZ$143.75

Bahco Tool Set 1/2Dr & 1/4Dr 77pc

Bahco S800 Socket Set 77 Piece 1/4 & 1/2in Drive BAHS800 S800 Chrome vanadium socket set 77 piece 1/4 and ½ in drive containing:- 15 x ½ in Hexagonal sockets 10, 12, 13, 14, 15, 16, 17, 18, 20, 21, 23, 24, 27, 32 and 34mm. 9 x ½ in AF sockets 3/8, 7/16(11mm), ½, 9/16, 11/16, 3/4(19mm), 13/16, 7/8(22mm) and 1 3/16 in). 4 x ½ in Hexagonal impact sockets 17, 19, 21 and 24mm. 1 x ½ in Sparkplug socket 21mm. 2 x ½ in Extensions 125 and 250mm (5 and 10 in) 1 x ½ in Universal joint. 1 x ½ in Reversible ratchet. 1 x 3/8 in F to ½ in M Adaptor. 12 x 1/4 in Hexagonal sockets 4, 4.4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm. 9 x 1/4 in Deep hexagonal sockets 4, 5, 6, 7, 8, 9, 10, 11 and 13mm. 2 x 1/4 in Extensions 50 and 100mm (2 and 4 in) 1 x 1/4 in T bar 100mm (4 in) 1 x 1/4 in Spinner 1 x 1/4 in Reversible ratchet. 1 x 1.4 in Universal joint 3 x 1/4 in Slotted screwdriver bits 4, 5.5 and 7mm. 4 x 1/4 in Phillips bits PH1, PH2, PH3 and PH4. 6 x 1/4 in Hex bits 3, 4, 5, 6, 8 and 10mm. 3 Hex keys 1.5, 2 and 2.5mm

Price: NZ$219.01 NZ$179.00

King Tony 3/8dr Imperial 8pc Socket Set HT9931

King Tony Socket Set A/F Deep 8pc 3/8"

Price: NZ$62.79 NZ$47.15

King Tony 3/8dr Torx Sockets on Rail

King Tony Torx Sockets on Rail 3/8" Drive

Price: NZ$66.98 NZ$37.95

King Tony Socket Set Metric Deep 8pc 3/8"dr

King Tony Socket Set Metric Deep 8pc 3/8"dr

Price: NZ$55.20 NZ$47.15

Powerbuilt 1/2dr 6pt Std Impact Socket Set HT1945

Built to exceed ANSI specifications Chrome vanadium steel, black oxide finish Centre hole is punched through for extra depth on the work surface Offers Z-Drive contacting the flat walls of fasteners for stronger grip N.B. Impact Sockets have no warranty unless obvious manufacture flaw 1/2” Dr (6pt) Impact Sockets 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm Powerbuilt 1/2dr impact std sockets KIT1158

Price: NZ$90.98 NZ$45.00

Powerbuilt 1/2dr 12pc 6pt Deep Impact Socket Set HT1943

Built to exceed ANSI specifications Chrome vanadium steel, black oxide finish Centre hole is punched through for extra depth on the work surface Offers Z-Drive contacting the flat walls of fasteners for stronger grip N.B. Impact Sockets have no warranty unless obvious manufacture flaw 1/2” Dr 12pc Deep Impact Socket Set 1/2 ” Dr (6pt) Deep Impact Sockets 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm Powerbuilt 1/2 deep impact set KIT1155

Price: NZ$124.71 NZ$89.00

Bahco Tool Set 1/2Dr & 1/4Dr 77pc

Bahco S800 Socket Set 77 Piece 1/4 & 1/2in Drive BAHS800 S800 Chrome vanadium socket set 77 piece 1/4 and ½ in drive containing:- 15 x ½ in Hexagonal sockets 10, 12, 13, 14, 15, 16, 17, 18, 20, 21, 23, 24, 27, 32 and 34mm. 9 x ½ in AF sockets 3/8, 7/16(11mm), ½, 9/16, 11/16, 3/4(19mm), 13/16, 7/8(22mm) and 1 3/16 in). 4 x ½ in Hexagonal impact sockets 17, 19, 21 and 24mm. 1 x ½ in Sparkplug socket 21mm. 2 x ½ in Extensions 125 and 250mm (5 and 10 in) 1 x ½ in Universal joint. 1 x ½ in Reversible ratchet. 1 x 3/8 in F to ½ in M Adaptor. 12 x 1/4 in Hexagonal sockets 4, 4.4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12 and 13mm. 9 x 1/4 in Deep hexagonal sockets 4, 5, 6, 7, 8, 9, 10, 11 and 13mm. 2 x 1/4 in Extensions 50 and 100mm (2 and 4 in) 1 x 1/4 in T bar 100mm (4 in) 1 x 1/4 in Spinner 1 x 1/4 in Reversible ratchet. 1 x 1.4 in Universal joint 3 x 1/4 in Slotted screwdriver bits 4, 5.5 and 7mm. 4 x 1/4 in Phillips bits PH1, PH2, PH3 and PH4. 6 x 1/4 in Hex bits 3, 4, 5, 6, 8 and 10mm. 3 Hex keys 1.5, 2 and 2.5mm

Price: NZ$219.01 NZ$179.00

Powerbuilt 1/4dr 30pc Socket Set HT1951

1/4” Dr (6pt Std) Sockets 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm 1/4” Dr Gear to Gear Ratchet (60T) 1/4” Dr 75mm/3” Wobble Extension 1/4 ” Coupler, Bits (25mm) Phillips #1, #2 Slotted 5mm, 6mm Pozi #2 Hex 5mm, 6mm Torx T-10, T-15, T-20, T-25, T-30, T-40 Robertson S-2 Packaged in a blow moulded case Powerbuilt 1/4dr Socket Set 940836

Price: NZ$56.90 NZ$45.90

King Tony KT2526MR01 Socket Set Dr 26pc

King Tony KT2526MR01 Socket Set Dr 26pc HT98610

Price: NZ$116.53 NZ$100.05

Fuller 527-8442 Socket Set - 1/2" Drive

Fuller 527-8442 Socket Set - 1/2" Drive 10mm to 32mm & 3/8" to 1.1/4".HT2792

Price: NZ$172.01 NZ$144.99

Fuller Pro Socket Set 1/4"Dr 23pc Af/Mm

Fuller Pro 1/4"Dr 23pc Af/Mm Socket Set

Price: NZ$59.00 NZ$59.00

King Tony 1/4dr 30pc metric/imperial Socket Set HT9860

King Tony 1/4dr 30pc Metric/Imperial Socket Set Contains - 1/4"DR. 6PT Metric Standard Sockets - 4 , 4.5 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 1/4"DR. 6PT SAE Standard Sockets - 5/32 , 3/16 , 7/32 , 1/4 , 9/32 , 5/16 , 11/32 , 3/8 , 7/16 , 1/2 1/4" Drive Metric Double Square Sockets - 8, 10 1/4" Drive SAE Double Square Sockets - 5/16, 3/8 1/4" DR. Extension Bar - 2, 4 Power Bar Ratchet Sliding T Bar Universal joint KT2530CR01

Price: NZ$128.80 NZ$100.05

Fuller Socket Set 3/8"Dr 33pc AF/Met

Socket Set 33pc 3/8Dr ranging 6mm to 22mm & 1/4" to 7/8"

Price: NZ$120.75 NZ$114.00

Fuller Socket Set 3/8"Dr 48pce

Fuller Socket Set 3/8"Dr 48pce - 3/8" & 1/2"Dr, 6-32mm & 1/4"-7/8"

Price: NZ$148.99 NZ$149.00

King Tony 3/8dr 36pc Socket Set HT9863

36 PC. 3/8" DR. Socket Wrench Set 12PT Metric Standard Socket - 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 19 , 20 , 21 , 22 12PT SAE Standard Socket - 1/4 , 5/16 , 11/32 , 3/8 , 7/16 , 15/32 , 1/2 , 9/16 , 19/32 , 5/8 , 11/16 , 3/4 , 13/16 , 7/8 3/8" DR. Extension Bar - 3" , 6" 3/8" DR Power Bar 3/8" DR Sliding T Bar 3/8" DR Ratchet 3/8" DR Universal Joint KT3036CR01

Price: NZ$168.99 NZ$189.00

Bahco Socket & Wrench Set 1/2Dr 87+7

Bahco 1/4dr & 1/2dr Socket & Wrench Set 94pc 1/4dr & 1/2dr metric & imperial Ratchet & accessories for both drives Includes a 13pc spanner set

Price: NZ$305.65 NZ$218.99

Bahco Socket Set 1/4" & 1/2"Dr 4mm - 32mm

1/4" & 1/2" drives. With extra small head ratchets that have 72 teeth to give a 5 degree action angle. Ranged 4 - 32mm

Price: NZ$269.00 NZ$299.00

Toptul 1/4dr Combination 29pc Socket Set HT0016

1/4dr Toptul Socket Set Contains: 6pt Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16,1/2, 9/16" Spinner Handle Reversible Ratchet with quick release 2 & 6" Extension Bar Universal Joint Sliding T-Handle GCAD2902

Price: NZ$100.40 NZ$57.99

Bahco 1/4dr Socket & Bit Set HT4719

An extra-short reversible rachet with a two component handle provides a comfortable grip and good accessibility in cramped spaces. The set contains the smaller socket and bit sizes most commonly used. It includes a reversible ratchet that will make most situations easier to deal with. The box is made of tough HDPE plastic with a cushion insert to keep the contents in position. 4mm - 13mm single hex sockets with 10mm extension, Fine toothed ratchet with soft grip, Torx, Phillips & Hex bits. SL25

Price: NZ$50.08 NZ$39.00

Bahco 1/4dr socket & bit set HT47190

1/4Dr Bit Set with sockets Minature ratchet convenient plastic case 2058/S26

Price: NZ$75.35 NZ$44.00

Powerbuilt 1/2dr 23pc metric socket set HT19840

1/2" Dr (12pt Std) Sockets 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 24mm, 27mm, 30mm, 32mm 1/2" Dr Gear to Gear Ratchet (60T) 1/2" Dr x 125mm/5”, 255mm/10” Extensions 1/2" Dr Universal Joint 1/2" Dr 3-way Adapter Packaged in a blow moulded case Powerbuilt 1/2dr 23pc Metric Socket set KBT0921

Price: NZ$101.20 NZ$89.00

Toptul 3/8dr Combination 34pc Socket Set HT0025

Toptul 3/8dr 6pt Socket Set 6pt Sockets – Metric - 8, 10, 12, 13, 14, 16, 17, 18, 19, 21, 22 Imperial - 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8 Spark plug sockets – 16, 21 mm Reversible ratchet handle with quick release Extension Bar – 3”, 6”, 10” Sliding T-handle with quick release Swivel Handle Universal Joint Speed Brace 1/4” (F) x 3/8” (M) Adaptor 1/4dr Spinner Handle Satin finish sockets, in metal case W440xD190xH52 (mm) GCAD3403

Price: NZ$204.93 NZ$139.00

King Tony Socket Set 1/4Dr 48pce Met/Af

King Tony 48pce 1/4dr Met/Af Socket Set

Price: NZ$269.10 NZ$203.55

Toptul 1/2dr Combination 43pc Socket Set HT0029

Toptul 1/2dr Metric & Imperial Socket Set Cotains: 6pt Sockets: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 23, 24, 26, 27, 29, 30, 32mm 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1 1/16, 1 1/8, 1 1/4" 16 & 21mm Spark Plug Sockets Reversible Ratchet with quick release 3, 5 & 10" Extension Bar 3/8F x 1/2M 3-way adaptor Swivel Handle Universal Joint GCAD4303

Price: NZ$288.77 NZ$179.00

Powerbuilt 1/2dr 76pc Metric Tool Kit HT1946

Socket Set Contains: 1/2” Dr (12pt Std) 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 22mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 34mm, 35mm, 36mm 1/2” Dr 125mm Extension 1/2” Dr Universal Joint 1/2” Dr 430mm/17” Power Bar 1/2” Dr x 5/8”, 13/16” Spark Plug Sockets 1/2" Dr Gear to Gear Ratchet (60T) Ball End Hex Keys 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm Long Series Ring & Open End Spanners 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Bit Driver Bits (25mm L) Phillips #0 #1, #2 (3), #3 Slotted 2.5mm, 3mm, 4mm, 5mm, 6mm Pozi #1, #2 (2) Torx T-10, T-15, T-20, T-25, T-27, T-30, T-40 Robertson #1, #2 (2) Packaged in a blow moulded case KBT1173

Price: NZ$225.00 NZ$228.00

King Tony 3/4dr 24pc Socket Set HT9908

3/4dr Combination Socket Set Metric Sockets - 22 , 24 , 27 , 30 , 32 , 36 , 38 , 41 , 46 , 50 Imperial Sockets - 1 , 1-1/8 , 1-1/4 , 1-5/16 , 1-3/8 , 1-7/16 , 1-1/2 , 1-5/8 , 1-3/4 , 2 Includes: Ratchet, Extension Bar, Sliding T Handle Please note - Ratchet may be slightly differnet than image. KT6224CR

Price: NZ$510.08 NZ$454.25

Tradespro 3/4dr 27pc socket set HT1960

Socket Set 3/4Dr 27pc Tradespro Metric 22mm to 50mm, Imperial 7/8" to 2" Standard Ratchet, Extensions, Sliding Tee Bar.

Price: NZ$356.50 NZ$249.00

King Tony 1"dr Socket Set HT9870

Socket Set 1" Drive Metric 36mm to 80mm Made in Taiwan

Price: NZ$1495.00 NZ$799.25

King Tony 30pc 1/4Dr Met/Af Socket Set

King Tony 30pc 1/4Dr Combination Socket Set 4-12mm 5/32-1/2

Price: NZ$128.80 NZ$100.05

King Tony 48pc 1/4Dr Met/Af Socket Set

King Tony 48pc 1/4Dr Met/Af Socket Set

Price: NZ$269.10 NZ$203.55

King Tony KT6531-36 Pipe Wrench 36"

King Tony KT6531-36 Pipe Wrench 36" HT9942

Price: NZ$285.43 NZ$183.00

King Tony KT6531-24 Pipe Wrench 24"

King Tony KT6531-24 Pipe Wrench 24" HT9941

Price: NZ$90.85 NZ$69.00

King Tony KT6531-18 Pipe Wrench 18"

King Tony KT6531-18 Pipe Wrench 18" HT9940

Price: NZ$60.47 NZ$45.00

King Tony KT3611-12R Adjustable Wrench 300mm

King Tony KT3611-12R Adjustable Wrench 300mm HT9984

Price: NZ$51.98 NZ$39.91

King Tony KT3611-10R Adjustable Wrench 250mm

King Tony KT3611-10R Adjustable Wrench 250mm HT9983

Price: NZ$39.10 NZ$29.90

King Tony KT3611-08R Adjustable Wrench 200mm

King Tony KT3611-08R Adjustable Wrench 200mm HT9982

Price: NZ$31.63 NZ$25.60

Powerbuilt 15"/380mm Adjustable Wrench HT1574

Built to exceed ANSI specifications Drop forged, chrome vanadium steel Features the ‘Euro Design’ type handle for greater comfort at higher torque applications with positive grip and balance Features a metric scale on jaw for easy fastener size identification Powerbuilt adjustable wrench 15"/380mm 940208HS

Price: NZ$69.00 NZ$42.00

Powerbuilt 18"/450mm Adjustable Wrench HT1575

Built to exceed ANSI specifications Drop forged, chrome vanadium steel Features the ‘Euro Design’ type handle for greater comfort at higher torque applications with positive grip and balance Features a metric scale on jaw for easy fastener size identification Powerbuilt adjustable wrench 18"/450mm WES5011

Price: NZ$113.85 NZ$71.99

Fuller 32pc Ring & Open Spanner Set HT2525

Fuller 32pc Spanner Set Short spanners - 10, 11, 12, 13, 14, 15 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" Standard spanners - 6, 7, 8, 9, 10, 12, 13, 15, 17, 18 1/4", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Supplied in plastic tray 421-1332

Price: NZ$89.00 NZ$69.00

King Tony 7pc Metric R&OE Spanner Set HT9910

7pc Metric Sizes: 10 , 11 , 12 , 13 , 14 , 17 , 19 KT1207MR

Price: NZ$98.44 NZ$56.90

King Tony 7pc Imperial R&OE Spanner Set HT9911

Imperial set Sizes: 3/8 , 7/16 , 1/2 , 9/16 , 5/8 , 11/16 , 3/4 KT1207SR

Price: NZ$117.46 NZ$56.90

King Tony 11pc Ring & Open End Wrench Set 8-24mm

King Tony 11pc Spanner Set European slimline type 15° open ended angle 15° ring end of fset from shaft Chrome vanadium alloy steel Chrome plated Contains - 8 , 9 , 10 , 11 , 12 , 13 , 14 , 17 , 19 , 22 , 24 KT1211MR

Price: NZ$128.80 NZ$102.35

King Tony 7pc Ratchet Ring & Open End Spanner Set HT9916

Set Contains: 10, 11, 12, 14, 15, 17, 19 In a material holder King Tony KT12107MR

Price: NZ$228.85 NZ$136.85

King Tony 14pc R/Oe Wrench Set 10-32

King Tony 14pc R/Oe Wrench Set 10-32

Price: NZ$302.68 NZ$204.70

King Tony 26pc R/O Set 6-32mm

King Tony 26pc R/O Set 6-32mm

Price: NZ$327.75 NZ$249.00

TopTul Long Double Ring Flat Spanner Set HT0036

Sizes: 8x10, 10x12, 12x14, 14x17, 17x19, 22x24 mm Flat style GPAP0601

Price: NZ$147.00 NZ$147.00

King Tony Metric Flare Wrench Set

KING TONY 6pc METRIC FLARE NUT WRENCH SET 8-22mm

Price: NZ$149.50 NZ$86.25